How to Position the Cutoff Man in Baseball: A Simple Guide
To position the cutoff man, place an infielder in a straight line between the outfielder with the ball and the base the runner is heading toward, usually about 60 to 90 feet from the base. The cutoff man should be lined up early, with his hands up, so the outfielder has a clear target to throw over.
Get this wrong, and a simple single turns into an extra base — or worse, a run. When we researched how coaches teach this, we found the biggest mistakes are bad angles and standing too close to the base. Many experts say a good cutoff can be the difference between a close play and an easy run for the other team. And honestly, who hasn’t watched a relay sail over everyone’s head at least once?
- The cutoff man lines up between the thrower and the target base, in a straight line.
- He stands roughly 60 to 90 feet from the base, depending on the throw.
- He calls for the ball loudly so the outfielder knows where he is.
- If the throw will beat the runner, he lets it go through — cutting is not always the right move.
- Communication and early positioning matter more than arm strength.
Below, we break down exactly how to line up as the cutoff man, step by step, so you can stop guessing and start making the right play every time.
Positioning the Cutoff Man Step by Step
The fastest way to get it right is to think of yourself as a relay station, not a hero. Your job is to line up early, give the outfielder a clear target, and decide whether to cut or let the throw go through. Here’s the whole process broken down.
Step 1: Read the Ball off the Bat
Before the ball is even fielded, you need to know where the runner is going. A single to left with nobody on? The throw is probably coming to second. A single with a runner on first? Now you’re lining up for home.
Many coaches we found teach infielders to “pre-read” the play before the pitch. That means knowing your job ahead of time so you’re not scrambling when the ball is in the gap.
Step 2: Sprint to the Line
Your first move is to find the outfielder with the ball, then find the base. Imagine a string pulled tight between the two. Your feet go on that string.
Even a few feet off the line can wreck the throw. Why? Because the outfielder is throwing at your chest, not at the base. If you’re offline, the ball arrives offline too.
Step 3: Get the Right Distance
Most coaches teach infielders to set up 60 to 90 feet from the base — roughly one to three throws away. But distance changes with the situation.
| Situation | Distance From Base | Why It Works |
|---|---|---|
| Throw to second on a single | 60–70 feet | Shorter throw from left or center; you stay in the line |
| Relay from the gap on a deep hit | 80–90 feet | You become the second arm on a long relay |
| Throw home with a runner scoring | About 60 feet | You can turn and fire quickly if a cut is needed |
Standing too close to the base is one of the most common mistakes we found in coaching discussions. If you’re ten feet from the bag, the outfielder can’t see you well, and you have no room to make a play on a bad throw.
Step 4: Give a Big, Visible Target
Both hands go up. High. Like you’re waving at the cheap seats. The outfielder needs to pick you out against the crowd, the fence, or the sky.
We found that many experienced outfielders throw to the chest of the cutoff man, so the ball arrives at a height anyone can handle. Give them that chest-level target and half the battle is won.
Step 5: Call for the Ball Loudly
“I got it!” — loud, early, and repeated. The outfielder is tired, looking over a shoulder, and running away from home plate. Your voice tells him exactly where the throw goes.
One word of advice many coaches repeat: never be silent. A quiet cutoff man causes more sail-away throws than a weak arm ever will.
Knowing When to Cut the Ball and When to Let It Go
This is where cutoff plays get interesting. Lining up is only half the job. The other half is deciding, in a split second, whether to intercept the throw.
The Simple Rule for Cutting
If the runner is going to beat the throw to the base, cut it. If the throw will arrive in time, let it go through — and yell something like “Let it go!” or “Cut! Cut!” so everyone knows the plan.
Think of it like a stoplight. Green means let it through. Red means catch, turn, and throw to wherever the play is now. Yellow? That’s when instincts and practice matter.
Reading the Runner
Watch the runner, not the ball. Is he slowing into third like he’s ordering coffee? Let the throw go. Is he digging hard for home with the catcher waiting? Maybe the throw is late and you should cut and fire elsewhere.
Many experts say the cutoff man should peek over his shoulder once to see the runner, then lock back onto the incoming ball. Two quick glances, that’s it.
Having a Backup Plan
Good teams decide before the pitch where the cut goes if it happens. Second base? Third? Home? If you’re guessing mid-play, you’ve already lost the race.
Coaches we found often assign this communication to the catcher or an infielder with a clear view, calling out “Cut to second!” while the play develops.
Common Cutoff Positioning Mistakes to Avoid
Most cutoff failures come from the same handful of habits. Fix these and you’re ahead of most rec-league teams.
- Standing too close to the base. You shrink the outfielder’s target and have no room to react.
- Drifting off the line. A few feet sideways turns a straight throw into a curveball.
- Watching the ball instead of the runner. You can’t make a smart cut decision with tunnel vision.
- Freezing on hard throws. Some infielders flinch and let a catchable ball fly past. Catch it or get out of the way — never both half-heartedly.
- No communication. Silence confuses the outfielder and your own teammates.

Quick Pre-Pitch Checklist for the Cutoff Man
Run through this before every pitch. It takes five seconds and saves a lot of headaches.
- Know the base situation and where the throw would go.
- Check the runner’s speed — fast or slow changes everything.
- Confirm with a teammate who has the cut and where it goes.
- Get to the line early, not after the ball is hit.
- Hands up, chest open, eyes on the outfielder.
- Be loud — call for the ball the moment you’re set.
Drills That Build Good Cutoff Habits
Reading about positioning is one thing. Repeating it until it’s automatic is another. We found a few simple drills that coaches return to again and again.
The Line Drill
Place a cone in the outfield and another at the base. Infielders sprint from their position, find the invisible string between cones, and set up at the proper distance. No ball needed at first — just footwork and angles. Many coaches say ten minutes of this a practice fixes half of all positioning problems.
Live Relay Rounds
Split the team. Outfielders hit or throw to gaps, infielders line up as cutoffs, and runners run real bases. Add a coach calling cut or let-through at random. This trains the decision-making part, which is honestly the hardest part of the whole play.
Communication Tag
During relays, require the cutoff man to call for the ball before it’s halfway to him. If he’s silent, the play resets. It feels silly at first — but loud habits stick.
Get these reps in and positioning stops being something you think about. It becomes something you just do, every single time the ball goes to the grass.
Conclusion
Positioning the cutoff man comes down to three habits: get on the line early, stand the right distance from the base, and be loud. Add a quick read of the runner and a pre-decided cut plan, and you’ve covered everything we found in coaching research. None of this requires a strong arm or pro-level talent — it just requires reps and attention. The teams that look sharp on relay throws are usually just the ones who practiced the boring parts. So grab a couple of cones, run the line drill at your next practice, and make good positioning automatic before your first close play of the season.
Frequently Asked Questions
Who should be the cutoff man in baseball?
It depends on the direction of the throw. The second baseman usually takes throws to first or second from right field, while the shortstop covers throws from left or center. On plays at home, the pitcher often backs up or becomes the cutoff, so your coach’s scheme matters most.
What if the throw gets past the cutoff man?
This is why backing up positions exist. The pitcher or a trailing infielder should be positioned behind the cutoff man on every relay. If you’re the one setting up, remember: catch it or get out of the way cleanly so a backup can make a play.
Should the cutoff man jump for a high throw?
No, and it’s a habit worth breaking early. Jumping leaves you unable to catch, turn, or deflect the ball. Stay grounded, keep your target up, and trust that the outfielder’s throw is aimed at your chest — that’s why you gave him a big target.
Can a cutoff play work in youth baseball?
Absolutely, and many youth coaches argue it matters even more there. Younger outfielders often make offline throws, so a cutoff man gives them a shorter, easier target. Keep the rules simple: line up, hands up, and yell for the ball.
How does the cutoff man know where to throw after a cut?
The call comes from a teammate with a clear view — usually the catcher or the coach. Ideally, that decision is made before the pitch even happens. If you hear “cut and fire to third,” you catch, plant, and let your throw match the call.
